Hi, complete noob here, will try to explain as best I can. Trying to get cyanogenmod 12.1 booted from SD. This is my first attempt for flashing any ROM on any device. I followed the acclaim tutorial on CM webpage (wiki.cyanogenmod.com...can't post link because I'm a forum noob). I can boot into CWM (v5.5.0.4) but when I go to install zip from sdcard, I get lots of errors. Without copy/paste, I'll do my best to state the important parts:
...
Installing update...
Warning: Nofile_contextscould not detect filesystem for /dev/block/platform/omap/omap_hsmmc.1/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/omap/omap_hsmmc.1/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
The error continues with nearly the same thing but for .../by-name/userdata at /data.
It again repeats the error with the /system (same as above)
Error ends with:
script succeeded: result was [0.200000]
Install from sdcard complete.
When I reboot the system, it goes back into stock B&N startup as if the ROM was not updated. No surprise considering the errors. I tried again and this time used CWM to enter "mounts and storage" and manually mounted /data and /system. The error for /data went away but the /system errors (x2) remain.
I've now tried cm-12.1-20151007-SNAPSHOT-YOG4PAO331-acclaim.zip and cm-12.1-20150901-SNAPSHOT-YOG4PAO236-acclaim.zip with the same result.
Oddly enough, when I tried older versions (have tried cm-11-20150831-SNAPSHOT-XNG3CAO3FN-acclaim.zip and cm-10.2-20131102-SNAPSHOT-M1-acclaim.zip), those files give me a different error. They say (example for CM v11):
Installing update...
E:Error in /sdcard/cm-11-20150831-SNAPSHOT-XNG3CAO3FN-acclaim.zip
(Status 0)
Installation aborted.
Is something wrong with my SD?!? I am using Linux Mint and Gparted to format the SD. I have the boot and lba flags on. Since I'm getting CWM to boot on the NT, I feel like the SD is OK and the error is in the .zip file or some setting on the NT itself. Does anybody have any ideas??
Potentially related side note: I've alternatively used the dd command and USB Image Writer to copy an img file to the SD (tried twrp-2.8.6.0-acclaim-sdcard.img and cm-12.1-20151007-SNAPSHOT-YOG4PAO331-acclaim-recovery.img) and everytime I get an error when I try to mount it on my laptop. I'd be happy to post the whole error, but the synopsis is "mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error". Using sudo fdisk -l /dev/sdb shows that "Disk /dev/sdb doesn't contain a valid partition table". Putting it in the NT and trying to boot does nothing, just black screen after the n logo when it should go to recovery.
So I've tried numerous paths (~20 tries total) and every one seems to have a road block. I hope something in here makes sense to somebody a whole lot smarter than me! Please help!
~Nate
...
Installing update...
Warning: Nofile_contextscould not detect filesystem for /dev/block/platform/omap/omap_hsmmc.1/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/omap/omap_hsmmc.1/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
The error continues with nearly the same thing but for .../by-name/userdata at /data.
It again repeats the error with the /system (same as above)
Error ends with:
script succeeded: result was [0.200000]
Install from sdcard complete.
When I reboot the system, it goes back into stock B&N startup as if the ROM was not updated. No surprise considering the errors. I tried again and this time used CWM to enter "mounts and storage" and manually mounted /data and /system. The error for /data went away but the /system errors (x2) remain.
I've now tried cm-12.1-20151007-SNAPSHOT-YOG4PAO331-acclaim.zip and cm-12.1-20150901-SNAPSHOT-YOG4PAO236-acclaim.zip with the same result.
Oddly enough, when I tried older versions (have tried cm-11-20150831-SNAPSHOT-XNG3CAO3FN-acclaim.zip and cm-10.2-20131102-SNAPSHOT-M1-acclaim.zip), those files give me a different error. They say (example for CM v11):
Installing update...
E:Error in /sdcard/cm-11-20150831-SNAPSHOT-XNG3CAO3FN-acclaim.zip
(Status 0)
Installation aborted.
Is something wrong with my SD?!? I am using Linux Mint and Gparted to format the SD. I have the boot and lba flags on. Since I'm getting CWM to boot on the NT, I feel like the SD is OK and the error is in the .zip file or some setting on the NT itself. Does anybody have any ideas??
Potentially related side note: I've alternatively used the dd command and USB Image Writer to copy an img file to the SD (tried twrp-2.8.6.0-acclaim-sdcard.img and cm-12.1-20151007-SNAPSHOT-YOG4PAO331-acclaim-recovery.img) and everytime I get an error when I try to mount it on my laptop. I'd be happy to post the whole error, but the synopsis is "mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error". Using sudo fdisk -l /dev/sdb shows that "Disk /dev/sdb doesn't contain a valid partition table". Putting it in the NT and trying to boot does nothing, just black screen after the n logo when it should go to recovery.
So I've tried numerous paths (~20 tries total) and every one seems to have a road block. I hope something in here makes sense to somebody a whole lot smarter than me! Please help!
~Nate
No comments:
Post a Comment